Roberts Radio ecologic 4 manual Finding new stations - DAB, Signal strength display - DAB

Finding new stations - DAB

As time passes new stations may become available. To fi nd new stations
proceed as follows:-	1

1.Press and release the AutoTune button, the display will show "Scan- ning". Your radio will perform a scan of the UK DAB frequencies. As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list

2.To carry out a full scan of the entire DAB band (band III) press and

hold down the AutoTune button for more than 2 seconds and then

release. The display will show "Scanning". As new stations are found2 the station counter on the right-hand side of the display will increase

and stations will be added to the list

Signal strength display - DAB

1. Press and release the Select button to switch between the current	1
information display and the signal strength indication.

2.Position your radio and carefully angle the telescopic aerial for best reception using the signal strength display as a guide. Move your radio around and position so as to give maximum number of black rectangles on signal strength display. The clear unfi lled rectangle indicates the minimum signal level required for satisfactory reception.

9