Manual tuning - FM
1.Press the On/Off button to switch on your radio.
2.Press the DAB/FM button to select the FM band. Carefully extend the telescopic aerial fully for FM reception.
3.Rotate the Tuning control to tune to a station. With each click of the control the frequency will change up or down by 50 kHz.
4.When the waveband end is reached the radio will recommence tuning from the opposite waveband end.
5.Set the Volume control to the desired settings.
6.To switch off your radio press the On/Off button.
If you fi nd that an FM broadcast has a lot of background hiss, this may often be reduced by setting the radio into Mono reception mode for the current FM station. Please refer to the section "Stereo / Mono setting - FM" on page 18 for further details.
If you need any further advice, please call our Technical Helpline on :-
1,6
2
3
5
020 8758 0338 | 14 |
