Dynamic Range Control (DRC) settings - DAB only
DRC can make quieter sounds easier to hear when your radio is used in a noisy environment. This function is only for the DAB waveband.
1.Press the On/Off button to switch on your radio.
2.Press and release the Setup button until "Station order" appears on the display.
3.Press and release the Tuning Up and Down buttons until the display shows "DRC value".
4.Press and release the Ok/Select button to enter adjustment mode.
5.Press and release the Tuning Up or Down buttons to select required DRC setting (default is 0) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster. DRC 1 DRC is set as sent by broadcaster.
6.Press and release the Ok/Select button to confirm the setting. The display will return to radio mode.
1
2,4
3,5 3,5
4,6
19