Alarm set to Once

1.Rotate the Tuning/Select control until "Once" is highlighted on the display. Press and release the Select button or theTuning/ Select control.

2.Rotate the Tuning/Select control until the date is highlighted on the display. Press and release the Select button or theTun- ing/Select control to enter date setup.

3.Rotate the Tuning/Selectcontrolto select the required date. Press and release the Select button or theTuning/Select control.

4.Rotate the Tuning/Select control until the hour digits are high- lighted on the display. Press and release the Select button or theTuning/Select control.

5.Rotate the Tuning/Selectcontrolto select the required hour. Press and release the Select button or theTuning/Select control.

6.Rotate the Tuning/Select control until the minute digits are highlighted on the display. Press and release the Select button or theTuning/Select control.

7.Rotate the Tuning/Select control to select the required minute. Press and release the Select button or theTuning/Select con- trol.

continued on next page

If you need any further advice, please call our Technical Helpline on :-

1,2

1,2

3,4

3,4

5,6

5,6

7

7

020 8758 0338 (Mon-Fri)

44