Roberts Radio MP-43 manual IPod docking

iPod docking

Your MP-43 sound system has an iPod dock facility which allows you to play digital audio files and video soundtracks held on your iPod directly.

The MP-43 uses the Universal Dock Connector developed for use with iPods. Recent models of iPod are supplied with adaptor inserts which ensure correct alignment of the iPod with the electrical connector. Earlier models of iPod were not supplied with the necessary inserts, and so your MP-43 is supplied with insert types 1 - 7. Should you require a later insert to use your iPod with the MP-43, then please contact an iPod accessories supplier.

1.Ensure that the sound system is in standby. Carefully remove the iPod dock connector cover from the top of your sound system.

2.Place the iPod docking adaptor (types 1 - 7 supplied with the MP-43) into the iPod docking recess so that it is securely seated.

3.Carefully place your iPod on the universal iPod dock connector then press the On / Standby button to switch on the sound system. To avoid possible damage to either device, not use your iPod without the correct adaptor fitted in the dock connector.

4.To select the iPod mode press the Media button until "iPod" shows on the display. If it was previously playing, your iPod will switch on and continue playing from where it was previously stopped.

Note: The MP-43 sound system is able to recharge your iPod's internal battery. Recharging does not take place while your MP-43 is using DAB or FM radio.

Your iPod will use its backlight settings as configured. If these need changing, use the iPod's Settings menu.

iPod Docking

iPod dock connector

2,3

Docking recess

3

4

31