Setting the HWS (Humane Wake System) alarm
A repeating beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15 seconds for 1 minute followed by 1 minutes silence before repeating the cycle. The HWS alarm will sound for 1 hour unless turned off by pushing the "Power" button.
1.Press the 
button the display will show the last alarm time set, (this will be "0:00" the first time the
alarm is set). The alarm symbol 
will flash in the display.
2.Press the numbered buttons to set the alarm on time, followed by the Enter button to complete the setting The display will return to showing real time.
3.To verify the alarm time, press the 
button to display the alarm time followed by the Enter button to return to real time mode.
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
M | 0 | C |
|
|
| Freq |
|
|
| Tim e S et |
AM / PM | M em o Sca n | M em o D e l | E n te r |
42