Roberts Radio R9957 manual Charging your radio, Using Dynamo power

Charging your radio

Your radio can be powered by winding the dynamo handle which charges an internal rechargeable battery, by using ordinary alkaline batteries or by using an adaptor. (not supplied)

Using Dynamo power

1.Ensure the telescopic aerial is in the rest position before winding the dynamo handle.

2.Take out the Dynamo power handle from its rest posi- tion.

3.Wind the Dynamo handle either clockwise or anti-clockwise until the charging LED indicator is illuminated. Winding the radio for 1 minute will give around 30 minutes charge.

4.Ensure the handle is placed back in the rest position once charged.

Note: The dynamo will not operate if an AC adpator is con- nected to the radio.

If you need any further advice, please call our Technical Helpline on :-

3

3

020 8758 0338 (Mon-Fri) 6