Roberts Radio RD-28 manual Finding new stations, Autoselect

Finding new stations

As time passes new stations may become available. To fi nd new stations proceed as follows:-

1.Press and release the AutoTunebutton, the display will showAutotune Quick scan. Your radio will perform a scan of the UK DAB frequencies. As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list.

2.To carry out a full scan of the entire DAB Band III frequencies press and hold down the Auto Tune button for more than 2 seconds and then release. The display will showAutotune Full scan.As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list.

1

2

Autoselect

As an alternative to pressing the Select button to select a station your radio can be set so as to automatically select a station.

1.Rotate the Tuning control a few clicks in either direction, immedi- ately press and hold down the Select button until the display shows Autoselect ON.

2.Rotate the Tuning control until the station you require is visible on the display. After a few seconds your radio will automatically select the station shown on the display.

3.To switch off autoselect rotate the Tuning control a few clicks in either direction, immediately press and hold down the Select button until the display shows Autoselect OFF.

1

1

7