Roberts Radio RD-45 manual Finding new stations - DAB, Signal strength display - DAB

Finding new stations - DAB

As time passes new stations may become available. To find new stations proceed as follows:-

1

1.	Press and release the Auto Tune button, your radio will perform a
	scan of the UK DAB frequencies. As new stations are found the station
	counter on the right-hand side of the display will increase and stations
	will be added to the list.
2.	To carry out a full scan of the entire DAB Band III frequencies press
	and hold down the Auto Tune button for more than 2 seconds and	2
	then release. The station counter on the right-hand side of the display

will increase and stations will be added to the list.

Signal strength display - DAB

1. Press and release the Info button until the display shows signal	1,3
strength.

2.Position your radio and carefully angle the telescopic aerial for best reception using the signal strength display as a guide. Move your radio around and position so as to give maximum number of black rectangles on signal strength display. The clear unfilled rectangle indicates minimum signal level required for satisfactory reception.

3.Press the Info button to exit the signal strength display.

9