Roberts Radio RD-49 Dynamic Range Control (DRC) settings - DAB, On/Off button, Select button, Select button, Menu/Info button, Tuning Up/Down buttons, Tuning Up/Down buttons

Dynamic Range Control (DRC) settings - DAB

DRC can make quieter sounds easier to hear when your radio is used in a noisy environment.

1.Press the On/Off button to switch on your radio.

2.Press and hold in the Menu/Info button the display will show “Software.”

3.Press the Tuning Up/Down buttons until the display shows "DRC value".

4.Press and release the Select button to enter adjustment mode.

5.Press the Tuning Up/Down buttons to select required DRC setting

(default is 0) .

DRC 0 DRC is switched off, Broadcast DRC will be ignored. DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.

DRC 1 DRC is set as sent by broadcaster.

6.Press and release the Select button to confirm the setting. The display will return to normal tuning mode.

Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will have no effect.