Roberts Radio RD-50 manual Finding new stations DAB, Autoselect DAB

Finding new stations - DAB

As time passes new stations may become available. To find new stations proceed as follows:-

1.Press and release the AutoTune button, the display will show "Autotune Quick Scan". Your radio will perform a scan of the UK DAB frequencies. As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list.

2.To carry out a full scan of the entire DAB Band III frequencies press and hold down the AutoTune button for more than 2 seconds and then release. The display will show "Autotune Full scan". As new stations are found the station counter on the right-hand side of the display will increase and stations will be added to the list.

1

2

Autoselect - DAB

As an alternative to pressing the tuning control to select a station your radio can be set to automatically select a station.

1.	Rotate the Tuning control a few clicks in either direction, imme-
	diately press and hold in the tuning control until the display shows
	"Autoselect ON".	1
2.	Rotate the Tuning control until the station you require is visible on
	the display, after a few seconds your radio will automatically select
	the station shown on the display.
3.	To switch off Autoselect rotate the Tuning control a few clicks
	in either direction, immediately press and hold in the Tuning control
	until the display shows "Autoselect OFF".
If you need any further advice, please call our Technical Helpline on :-
		8
020 8758 0338 (Mon-Fri)

rd-50 rr version instruction book.pmd 9 6/3/2005, 9:18 AM