Listening to the radio
FM operation
1.Set the Function switch to the 'Radio' position.
2.Select 'FM' using the Waveband switch.
3.Adjust the Volume control until a hissing sound is heard.
4.The Telescopic aerial which is only operational on FM, should be fully extended.
5.Carefully tune to the desired station using the Tuning control.
6.Angle and rotate the Telescopic aerial to a position giving the best reception. A knuckle joint at the base of the aerial allows this movement and an angle of 45 degrees will usually be satisfactory. The FM band is marked in Megahertz (MHz).
7.To receive stereo broadcasts set the Mono/Stereo to the 'Stereo' position the Stereo indicator will light up. If the station being received is weak some hiss may be audible, to reduce the hiss set the Mono/Stereo switch to the 'Mono' position to return to mono operation.
8.Adjust the Deep bass boost switch to the required position.
9.To switch off the radio set the Function switch to the 'Tape Off' position.
If you need any further advice, please call our Technical Helpline on :-
Volume
PROVIDED BY | FM | 88 | 94 | 96 | 100 | 104 106 | 108 | MHz | ||
| M W | 54 | 0 600 | 80 0 10 00 | 12 00 | 1600 | KHz | |||
| LW | 150 | 160 | 180 | 200 | 2 20 | 24 0 | 2 60 | KHz | |
|
| SC 9911 |
|
|
|
|
|
| ||
| 3 Band Stereo Radio Cassette Recorder |
|
|
|
|
Tuning
On
Off
020 8758 0338 | 4 |
|