Robic M417 Instructions and Operating Guide

Thank you for buying this Robic M-417 pedometer. Please read these instructions carefully before using it to ensure safe and correct use. Do not expose your pedometer to direct sunlight, rain, dust, severe shock, humidity or immerse it in water. As a sensitive instrument, the M417 may cease to operate if dropped onto the floor. Make certain it is securely attached to your clothing. To open the cover, hold the M417 in one hand with the clip towards your palm and gently use the thumb of your other hand to open the case using the lip at the top of the lid.

The M417 has five (5) separate functions.

1.) STEP COUNTER counts up to 100,000 steps taken and is always seen on the upper row of the display.

These functions can be viewed on the lower row by pressing MODE:

2.) DISTANCE shows how far you have traveled to within 1/1000 of a mile.

3.) “CALORY” calculates how many calories you have expended.

4.) TIMER automatically times the hours and minutes you have spent walking.

5.) CLOCK shows the current time of day in Hours and Minutes.

There are three (3) pushbuttons which activate all operations of your pedometer: Pressing MODE (Top Button) selects Distance, “Calory”, Timer or Clock in the lower row.

Use SET (Middle Button) to input your stride length in Distance, your weight in Calorie and to set the hour and minute in Clock.

UP/RESET (Bottom Button) will advance (increase) the value being input during SET and will Reset all function values to zero if not in SET.

This shows the location and layout of all digits and indicators on the M417 Dual Display pedometer.

For the most accurate results, the M417 must be Horizontal and Perpendicular to the ground, straight and true, not angled or dangling from your clothing. If the pedometer is not straight and true, you will not receive accurate results. Factors which may result in an inaccurate step count include shuffling, walking uphill or down and walking at an inconsistent pace. Position the Pedometer by securely attaching it at waist level to your belt or to the top of your pants or shorts, on the front of your clothing close to the crease line of your pants (not at your side). The case must be closed at all times, opened only to view results. A good way to check if your pedometer is positioned correctly is simply take 50 or 100 steps, counting them to yourself. Now, check the step count value on your pedometer. If the reading varies somewhat, please make sure your wearing the pedometer is positioned correctly.

Page 1
Image 1
Robic manual Robic M417 Instructions and Operating Guide