4Disconnect all PSU connectors from the motherboard and the peripherals devices such as case fans, HDD, FDD, DVD, CD-ROM, and so on.

5Remove the old power supply from your computer case and install your new Rocketfish power supply.

6Connect the 24-pin Main Power Connector to your motherboard.

Note:

Use 24-pin to 20-pin adaptor if your motherboard requires 20-pin power connector.

7Connect the Serial ATA connectors to the peripheral devices.

8Connect the peripheral 4-pin power connectors if you are still using an IDE connector for hard drives or a DVD/CD drive.

9Connect the PCI Express power connector to your PCI Express graphics cards, as needed.

10Connect your case fans to the regular 4-pin peripheral connectors if you are using these fans.

Caution:

Make sure that all connectors are correctly connected. Incorrect connection could prevent your computer from booting and some components might even be damaged.

11Close your computer case and connect the AC power cord to the power supply.

Booting your system

To boot your system:

1Turn on the power supply by setting the I/O switch on the power supply to the "I" position.

2Turn on your computer by pushing the power button on the front of your system.

RF-700WPS 5