•FAN speed auto-controlled by a thermal sensor inside the power supply

•100% Hi-pot and burn-in tested

•Supports 12-16 SCSI hard drives

•Components include:

Output cables

5.5inches

5.9 inches

(140.0 mm) Fan

(150.0 mm)

4.7 inches

 

12 cm

3.4inches (86.0 mm)

AC socket

Power switch

Installing your power supply

To make sure you connect your power supply correctly, check your motherboard and graphics card manuals for compatibility before connecting RF-700WPS to any of your devices.

To install your power supply:

1Check your local AC voltage before installation (115 VAC voltage is for USA, Japan, and so on, and 230 VAC voltage is for Europe, South East Asia, and many other countries).

Caution:

Be sure to connect the PSU (Power Supply Unit) to local input AC voltage only. Setting the incorrect voltage can damage the power supply and connected equipment, and may void your warranty. The RF-700WPS is compatible with 115VAC and 230VAC input voltage.

2Turn off your computer, then unplug the power cord from your old power supply.

3Open your computer case following the directions provided in your case manual.

4