RocketFish RF-71SDC Setting up the sound card, Installing the sound card, Installing the drivers, To install your sound card:, To install the Windows drivers:

Item	Description	Function
5	Line Out 3 jack	Connects to center and subwoofer inputs on powered analog speakers or a multichannel
		home theater receiver for audio output.
		• On 5.1 systems: Front Center and Subwoofer
		• On 7.1 systems: Front Center, Subwoofer, and Side Left.
6	Aux In connector	Connects to the analog output on an audio device (for example, a TV tuner) using an
		analog CD cable (available separately).
7	Front panel header	Connects to one end of the Intel Front Panel Audio cable (available separately).
	audio connector

Setting up the sound card

Installing the sound card

To make sure you install your sound card correctly, check your motherboard manual.

To install your sound card:

1Turn off your computer, then unplug the power cord from your power supply.

2Open your computer case following the directions provided in your case manual.

3Find an open PCI slot and remove the slot cover for that slot from the back of your computer.

4Insert the sound card in the PCI slot and secure with the screw you removed from the slot cover.

5Close your computer case and connect the AC power cord to the power supply.

Installing the drivers

Note: Install the drivers and applications before using the sound card.

To install the Windows drivers:

1After you have installed your audio card, Windows automatically detects your audio card and searches for device drivers.

2Insert the Installation CD into your CD/DVD drive. If it does not run automatically, do the following:

4