5Remove the memory card.

Caution: Do not remove memory cards while the card reader LED is flashing or blinking.

Formatting a memory card
To format a memory card:

1Click Start, and then click My Computer.

2Under Removable Storage, right-click the memory card icon representing the card type inserted, then click Format.

3Type a label name into the label field, if you want to see the name of your memory card appear under its memory card icon.

4Click Start.

5Click OK in the Format Complete window.

6 Click Close to finish.

Disconnecting the enclosure from your computer

To disconnect the enclosure from your Windows computer without shutting it down:

Note: If a drive window is open or the hard drive enclosure is active, close any associated windows before attempting to remove the enclosure.

1Left-click the Hot plug icon (located in the notification area of taskbar where your usually see the time displayed).

2Select the drive you want to unplug, then click STOP.

3When Windows notifies you that it is safe to do so, unplug the enclosure from your computer.

To disconnect the enclosure from your Macintosh computer without shutting it down:

1Drag the USB icon into the TRASH.

2 Unplug the enclosure.

RF-AHD35 13