Using the hard drive enclosure
Installing your hard drive in the enclosure
Read these safety precautions before you install your hard drive in the enclosure:
•Use only the accessories provided in the accessory package.
•Always unplug the AC power adapter before installing the hard drive.
•Do not use a power supply with a different voltage rating.
•Make sure that you first touch an unpainted, grounded metal object to discharge any static electricity stored on your clothing or body before touching any electronic components.
•Handle the printed circuit board (PCB) edges only. Avoid touching the onboard electronic components.
To install your 3.5" SATA hard drive in the enclosure:
1Remove the four screws from the back of enclosure, then open the front cover plate.