Installing and using software

Installing the software

To use the keyboard and mouse hotkey buttons, you must install the software on the included CD.

To install the software:

1Plug the USB Bluetooth receiver into a USB port on your computer.

2Insert the included CD in the disc drive. The introductory screen appears automatically. If the screen does not appear automatically, double-click the autorun.exe file on the CD.

3Click Install Driver. The Welcome screen appears.

4Follow the on-screen instructions to complete the software installation.

Note: If the “Bluetooth device not found” message appears, plug the USB Bluetooth receiver into a USB port on your computer, then click OK. The Found New Hardware Wizard starts installing the software.

5When the installation is complete, click Finish.

To uninstall the Bluetooth stack:

1Remove the USB Bluetooth receiver.

2In Windows Vista or Windows 7, click Start, Control Panel, then click Programs and Features.

Or

In Windows XP, click Start, Settings, Control Panel, then click Add/Remove Programs.

3Click WIDCOMM Bluetooth Software in the program list, then click Uninstall (Windows Vista or Windows 7) or Remove (Windows XP). A confirmation message appears.

4Click Yes to uninstall or No to cancel. When the program has been removed, a prompt tells you to restart the computer.

5Click Yes to restart your computer now or No to restart later.

18