3Replace the battery cover.

Installing or uninstalling the WIDCOMM Bluetooth stack

Installing the WIDCOMM Bluetooth stack

To install the WIDCOMM Bluetooth stack:

1Plug the USB Bluetooth dongle into a USB port on your computer.

2Insert the provided installation CD in the CD or DVD drive. The installation stack loads automatically.

Note: If the installation stack does not load automatically, double-click Setup.exe in the bin folder of the installation CD.

The Welcome Screen introduces you to the installation process.

3Follow the on-screen prompts to complete the WIDCOMM Bluetooth Software wizard.

Note: If the “Bluetooth device not found” message appears, plug the USB Bluetooth dongle into a USB port on your computer, then click OK. The Found New Hardware Wizard starts installing the components for the USB Bluetooth dongle.

4After the wizard finishes, remove the dongle and plug it back in. The keyboard and mouse pair automatically.

5Click Finish to exit the installation.

6In Windows 2000, a prompt requires you to restart the computer so that the Bluetooth stack takes effect. Click Yes to restart your computer now or No to restart later.

12