Rapid Fire Wireless Controller

Congratulations on your purchase of a new Rocketfish Rapid Fire Wireless Controller. This controller was designed with input from gamers and includes some exciting new features:

•A modified design: better stick placement; a responsive, one-piece directional pad; improved handle ergonomics, and one-button Rapid Fire

•TouchSense®, dual rumble motors for lifelike vibration

•Wireless connectivity to your PS3™ console

•Power up your PS3™ console directly from the controller

•A built-in, rechargeable NiMH battery

Package contents

•Wireless controller with a built-in, rechargeable battery

•9 ft. (2.74 m) USB charging cable

Product features

Top

#Description

1 PS button

2 Select button

3 Left stick

4 Rapid Fire button

5 Directional pad

6 Start button

Back

PS

#Description

7 button

8 button

9 button

10 button

11Right stick/R3 button

12Power switch

Charging the battery

Before you use the controller for the first time, or after you have not used it for a long time, you must charge the battery. (If the controller will not be used for long periods of time, the battery should be recharged at least once every six months.) It takes approximately 3.5 hours to fully charge the battery.

To charge the battery

1Insert the mini-USB plug on the charging cable into the USB port on the front of the controller.

IMPORTANT: Make sure that the min-USB plug is aligned correctly with the port before inserting into the plug to avoid damaging either the port or the plug.

NOTE: Recharging a battery that has not been fully discharged shortens its life.

2Insert the USB plug into the USB port on your PS3, which must be plugged in and drawing power.

3Turn on your PS3. The battery starts charging

and the PS button in the middle of

 

the controller lights blue. When the

 

battery is fully charged, the PS light

 

turns off.

PS

Pairing your controller

Before you use your controller, you need to pair it with your PS3 console.

1Connect the USB cable between your controller and PS3 console.

2Turn on the controller, then press its PS button. When the PS3 recognizes your controller, all the port indicators flash slowly.

4 3 2 1

When your controller has been assigned to a port, the indicator number for the port turns solid red.

4 3 2 1

PS

3Press the PS button again to assign a port number.

Notes:

•

Pairing and assigning controller numbers can only be done when the

 

system is turned on.

•

When a paired controller is used with another PS3 system, the pairing

 

with the original system is cleared. Pair the controller with the system

 

 

#

Description

 

#

Description

 

 

1

USB port

 

4

Port indicators

 

 

2

R1 button

 

5

L1 button

RF-GPS3101

QUICK SETUP GUIDE

3

R2 button

6

L2 button

again if the controller has been used with another system.

• If the controller or the system is turned off, the port indicators on the

controller turn off and the assigned number is cleared.