RocketFish RF-GPS31104 setup guide Package contents, PairingYour headset, Charging the battery

Wireless Headset

Congratulations on your purchase of the RF-GPS31104wireless headset. This headset represents the state of the art in wireless headset design and is designed for reliable and trouble-free performance.

Package contents

• Wireless headset	• Charger	• Quick Setup Guide
Product features

Turning the headset on and off

1To turn on the headset, press and hold the power button for about two seconds.The headset beeps and the indicator blinks yellow-green.

2To turn off the headset, press and hold the power button for about four seconds. The headset beeps and the indicator briefly lights red.

“Pairing”Your headset

Your new Rocketfish Bluetooth wireless headset needs to be paired to your PS3 Turn your PS3 off on the back for about 10 seconds and then back on. Power on your PS3 console with the touch power button on the front of the PS3.

Volume down Volume up

Earpiece

Power/Send/End button

Indicator light Charger connector

Ear loop

Find the Settings menu and press X on Accessory Settings. Press X on the icon labeled: Register Bluetooth® Device.

Charging the battery

Peel off the protective plastic film on the front of the headset, then charge the headset before using.

•Connect the smaller end of the micro USB cable (included) to the opening on the end of the headset. To connect the cable to a power source, either connect the larger end of the cable to a USB port on your computer, or to the included wall adapter, which you then plug into a wall outlet. If you charge with your computer, make sure the computer is powered on. While the battery is charging, the indicator lights red. When the battery is fully charged, the indicator lights

yellow-green.

Note: Charge the headset with attached USB cable and provided wall charger only.

RF-GPS31104 QUICK SETUP GUIDE

Scroll down and press X on the icon labeled Manage Bluetooth Devices. Select Yes to register a new device (if this is the first time registering a Bluetooth device) then press X on Start Scanning.

Now prepare your Rocketfish Bluetooth wireless headset to be paired with the PS3 by holding down the Power/Send/End button (the entire top area) on the Rocketfish Bluetooth wireless headset for about 8 seconds. The LED on the device will start flashing a continuous green.

Once scan is complete, the PS3 will recognize all Bluetooth devices within