Wii LAN Adapter
Package contents
•
•6’ (1.8 m) LAN cable
Features
•Transmission speed: 10M/100M
•LED indicator for connection and transmission
•Working current: 170mA
•Rated voltage: 5V
•Rated power: 850mW
•Working temperature:
30 - 158° F
•Dimensions: 3.15” × 1.38” × .87” (80 × 35 × 22 mm)
| QUICK START GUIDE |
1 |
Connecting your adapter
SocketRouter
LAN adapter
Modem
LAN cable | Wii console |
1Connect one end of the supplied LAN cable to a router.
Connect the other end to your adapter.
2Turn off your Wii console, then plug the adapter into one of the USB ports on your Wii console.
3Turn your Wii console back on and test the connection by using your Wii remote control to navigate to Wii options:
•Wii Setting
•Wii system setting2
•Internet
•Connection settings
•Wired
•Connection test
If the adapter was connected properly, you will see“The connection test was successful” on your screen. You may be prompted to perform Wii system updates.
Notes
•There are two kinds of LAN cables: crossed and direct. Only direct LAN cable can be connected with this LAN adapter.
•The transmission speed may slow down if the LAN is shared by
more than one device.
For more information about connecting your Wii to a network, see the Wii user guide.
Cautions
•Do not plug or unplug the LAN adapter when the Wii console is turned on.
•Make sure that the LAN adapter is connected correctly to your Wii.
•This LAN adapter can only be used with a Wii. It does not work alone or with other kind of device or game console.
•Do not use the LAN adapter if it is damaged in any way.
•Do not touch the plugs with your finger or anything metal.
•Do not dismantle, refit, or repair the adapter in any way. You may damage it, which will invalidate your warranty.
•Keep the adapter away from wet, hot, and oiled environments.
12/10/2008 8:46:57 AM
