2-outlet Flat-panel Surge Protector
with Noise Filtering
RF-HTS100
Congratulations on your purchase of this Rocketfish Surge Protector with coaxial cable protection and noise filtering.
Your surge protector:
•Provides surge protection for sensitive electronic devices
•Provides surge protection for a coaxial cable connection
•Incorporates noise filtering to provide“clean”power that will maximize the performance of your equipment
Features
LED indicator
Standard outlets
Coaxial cable ports
•Compact
•43 dB EMI/RFI noise
•1,200 joules surge
•Coaxial cable surge
•LED
•
Operating instructions
1 | Plug your surge protector into a standard 120V AC outlet. |
| Note: Use the lower outlet if you want to use the upper outlet for |
| another power cord. |
2 | Plug one or two devices into your surge protector. |
3 | Connect the incoming coaxial cable source (i.e., the cable jack on |
| the wall or incoming satellite line) to the coaxial jack marked IN |
| on the surge protector. |
4 Connect another coaxial cable to the cable OUT jack on your | |
| surge protector and to the CABLE IN jack on the TV (when not |
QUICK SETUP GUIDE | using a cable or satellite box) or to the CABLE IN jack on the cable |
or satellite box. |