Operating instructions

1Plug the power cord of the Rocketfish Power Manager into a standard 120V AC outlet. If the LEDs do not light up, press the main power switch/circuit breaker on the front of the unit.

2Plug the power cord of your primary home theater device, such as a TV, into the Master outlet of the Power Manager. When this device is powered off or goes into a SLEEP or STANDBY mode, power to the devices plugged into the Master-controlledoutlets will automatically be shut off, saving energy by preventing them from drawing any standby current.

3Plug the power cords of your secondary devices, such as a Blu-ray/DVD player, A/V receiver, CD player, etc., into the Master-controlledoutlets of the Power Manager.

NOTE: Do not plug any device into a Master-controlledoutlet that you wish to use while the power of the primary device plugged into the Master outlet is powered off, as these outlets only provide power to the connected devices while the primary device is powered on.

4Plug the power cords of any devices that require constant power, such as a DVR/PVR, or devices that you wish to use while the primary device is powered off, into the Always-onoutlets of the Power Manager.

5Connect the incoming coaxial cable source (i.e., the cable jack on the wall or incoming satellite line) to the coaxial jack marked IN on the Power Manager.

6Connect a separate coaxial cable from the coaxial jack marked OUT on the Power Manager to the coaxial input jack of the cable/satellite set-top box.

7After all devices have been properly plugged into the Power Manager and powered on, when you power the primary device that is plugged into the Master outlet on and off, the secondary devices that are plugged into the Master-controlledoutlets will automatically power on and off. Devices that are plugged into the Always-onoutlets will not be controlled by the primary device, and must be powered on and off separately as desired. NOTE: Should the Master-controlledoutlets not power on and off as described when the primary device plugged into the Master outlet is powered on and off, it is possible that the primary device draws too much current while in the OFF or STANDBY mode. In the event this should occur with your equipment, try plugging a different primary device into the Master outlet.

Specifications

•Load rating: 15 amps

•Line voltage: 125V AC @ 60 Hz

•Surge protection: 3 lines (L-N / L-G / N-G)

•Maximum surge current: 105,000 amps

•Maximum energy dissipation: 2,100 joules

•Clamping voltage: L-N / L-G / N-G = 400 volts

•EMI/RFI noise filtering: Up to 47 dB

•Standby power consumption: 0.98 watts

•UL-1449 certified

Safety precautions

•RISK OF ELECTRIC SHOCK–Use only in dry locations and only indoors.

•DO NOT plug into another relocatable power tap.

•DO NOT“daisy chain”surge protectors.

•DO NOT use with any aquarium equipment.

•DO NOT use if correctly grounded outlets are not available.

•DO NOT install this device if there is not at least 30 feet

(10 meters) or more of wire between the electrical outlet and electrical service panel.

Connected equipment limited lifetime warranty: up to $200,000 equipment coverage

One-year limited product warranty

See included warranty sheet, visit www.rocketfishproducts.com or call 800-620-2790 for additional connected equipment and product warranty information or for customer service.

© 2011 BBY Solutions, Inc., All Rights Reserved. Distributed by Best Buy Purchasing, LLC

7601 Penn Avenue South, Richfield, MN USA 55423-3645

ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.

ENGLISH 10-1214