4Plug the power cords of any devices that require constant power, such as a DVR/PVR, or devices that you wish to use while the primary device is powered off, into the Always-onoutlets of the Power Manager.

5Connect the incoming coaxial cable source (i.e., the cable jack on the wall or incoming satellite line) to the coaxial jack marked IN on the Power Manager.

6Connect a separate coaxial cable from the coaxial jack marked OUT on the Power Manager to the coaxial input jack of the cable/satellite set-top box.

7Connect the incoming Ethernet (RJ45) line to the Network line jack marked IN on the Power Manager.

8Connect a separate Ethernet cable from the Network line jack marked OUT on the Power Manager to the corresponding input jack on the device (i.e., Blu-ray player, set-top box, DVR, etc.).

9Connect the incoming phone (RJ11) line to the Phone line jack marked IN on the Power Manager.

10Connect separate phone line cables (up to two) from the Phone line jacks marked OUT on the Power Manager to the corresponding input jacks on the devices.

11After all devices have been properly plugged into the Power Manager and powered on, when you power the primary device that is plugged into the Master outlet on and off, the secondary devices that are plugged into the Master-controlledoutlets will automatically power on and off. Devices that are plugged into the Always-onoutlets will not be controlled by the primary device, and must be powered on and off separately as desired. Note: Should the Master-controlledoutlets not power on and off as described when the primary device plugged into the Master outlet is powered on and off, it is possible that the primary device draws too much current while in the OFF or STANDBY mode. In the event this should occur with your equipment, try plugging a different primary device into the Master outlet.

Specifications

•Load rating: 15 amps

•Line voltage: 125V AC @ 60 Hz

•Surge protection: 3 lines (L-N / L-G / N-G)

•Maximum surge current: 225,000 amps

•Maximum energy dissipation: 4,650 joules

•Clamping voltage: L-N / L-G / N-G = 400 volts

•EMI/RFI noise filtering: Up to 80 dB

•Standby power consumption: 1.82 watts

•USB port power output: 5V DC, 1.0 amp

•UL-1449 certified

Safety precautions

•RISK OF ELECTRIC SHOCK–Use only in dry locations and only indoors.

•DO NOT plug into another relocatable power tap.

•DO NOT“daisy chain”surge protectors.

•DO NOT use with aquarium equipment.

•DO NOT use if correctly grounded outlets are not available.

•DO NOT install this device if there is not at least 30 feet

(10 meters) or more of wire between the electrical outlet and electrical service panel.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003. Note: These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

ICES-003

This Class B digital apparatus complies with Canadian ICES-003.

Connected equipment limited lifetime warranty: up to $350,000 equipment coverage

One-year limited product warranty

See included warranty sheet, visit www.rocketfishproducts.com or call 800-620-2790 for additional connected equipment and product warranty information or for customer service.

© 2011 BBY Solutions, Inc., All Rights Reserved. Distributed by Best Buy Purchasing, LLC

7601 Penn Avenue South, Richfield, MN USA 55423-3645

ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.

ENGLISH 10-1240