Thank you for purchasing the Rocketfish Atmos Noise Cancelling Headphones. Your headphones have a built-in active noise cancellation (ANC) feature that diminishes ambient noise (such as surrounding conversations, an aircraft engine or construction noise).

Package contents

•Rocketfish™ Atmos™ headphones

•Carrying case

•Detachable audio cable

•USB charging cable

•Airline headphone jack adapter

•¼ in. headphone jack adapter

•User Guide

•Quick Setup Guide

Features

Audio cable jack

Charging LED ANC off/on switch

Mute button

Power

 

adapter jack

ANC power LED

 

Charging the battery

Before using your headphones for the first time, you should charge the battery for two hours. When the battery is fully charged, it provides up to 20 hours of ANC.

•Plug the charging cable into the power adapter jack on your headphones, and the other end into

a laptop USB port or other USB charger. Note: When the battery is charging, the charging LED lights red. When the battery is fully charged the charging LED lights green.

Note: Your Rocketfish Atmos headphones also function as a passive headset when used without the ANC function turned on, or if the battery is expired. Audio will always be available.

Connecting your headphones to an audio device

•Plug one end of the audio cable into the audio cable jack on the headphones, then plug the other end of the audio cable into the audio jack on your device, using the ¼ in. headphone jack adapter if necessary.

Using the ANC (automatic noise cancelling) feature

•The Mute button function can only be activated when the ANC switch is set to“on”.

•Slide the ANC off/on switch to the on position. When the ANC feature is turned on, your headphones block ambient noise. The audio sent though the audio cable is not affected. When the

ANC feature is turned on the power LED lights blue.

Note: You can use your headphones to block ambient noise even when your headphones are not connected to an audio device.

Muting your headphones

You can temporarily turn off your headphones so you can communicate with others without removing them.

•Press and hold the Mute button. The ANC feature and audio will turn off.

•Release the Mute button to turn the ANC feature and audio back on.

Connecting your headphones to an airplane’s AV system

•Plug the audio cable into the twin-plug adapter, then plug the twin-plug adapter into the audio jacks on the airplane (usually on the armrests).