Wireless sender/receiver (front panel)
# | Feature | Description |
1 | Standby indicator | Turns red when the wireless sender/receiver is in standby mode. |
|
|
|
2 | Power/Join | Press to turn the wireless sender/receiver on. Press and hold to initiate joining. |
button | Press again to go to standby mode. When you connect the AC power adapter, | |
|
| the device turns on automatically. |
| Power/Join | Lights blue when the HUB STATUS switch is set to DISABLE. |
| indicator | Lights green when the HUB STATUS switch is set to ENABLE. |
3 |
| The indicator will turn solid when it is joined in a network, if the device is not in |
| a network, the indicator blinks slowly. When the device is put in joining mode, | |
|
| |
|
| the indicator blinks rapidly. See “Establishing communication” on page 21 for |
|
| more information. |
|
|
|
4 | Sender mode | Turns blue when sending audio. |
indicator | Note: This indicator will light automatically when a 3.5 mm connector or a USB | |
|
| cable is attached to the device (the device senses the cable connection). |
|
|
|