7Insert the mounting plate into the tripod head and lock it into place by pressing up on the
To adjust the tripod leg spread:
•Press down on the variable leg angle release on each leg to open the leg to the next preset angle (three available). Each leg can be adjusted over 90°.
To capture images from a low angle:
1Remove the tripod head from the tripod by unscrewing it from the head mounting plate.
2Remove the bottom end of the center column by pressing the two small buttons on the sides of the column while pulling the end cap away from the column.
3Remove the center column from the tripod body by pulling it up and out of the tripod.
4Insert the 3/8" (9.5 mm) center column end cap into the tripod body and secure it by tightening the center column locking knob.
5Remount the tripod head to the head mounting plate.6Mount your device to the tripod head.7Spread the tripod legs to lower your device to the desired height.# | Component | Description |
|
|
|
1 | 3/8" screw | Thread into the bottom of the tripod head. |
|
|
|
2 | Head mounting plate | Mount the tripod head on this plate. |
|
|
|
3 | Center column | Adjustable column provides quick height adjustments. |
|
|
|
4 | Leveling bubble | Lets you level the tripod platform. The tripod platform |
|
| is level when the bubble is within the circle. |
|
|
|
5 | Metal ring | Use as a hook when attached. |
|
|
|
6 | Variable leg angle | Push downward to adjust the tripod legs to one of |
| release | three preset angles. |
|
|
|
7 | Tightening screw | Use to secure the tripod head to the base. |
|
|
|
8 | Center column | Locks the center column in place. |
| locking knob |
|
|
|
|
9 | Leg | Supports your tripod and device. |
|
|
|
10 | Lift to adjust leg height, then close to lock. | |
|
|
|
11 | Retractable spike | Use the spike feet to prevent slipping on soft surfaces, |
| rubber feet | and use the rubber feet to prevent slipping on |
|
| smooth or hard surfaces. Turning the rubber feet |
|
| clockwise extends the retractable spike, and turning |
|
| the rubber feet |
|
|
|
12 | Center column end cap | Can be removed and mounted as the center column for |
|
| |
|
| your tripod. One has a 1/4" (6.4 mm) screw for attaching |
|
| your device directly to the end cap, and the other has a |
|
| 3/8"(9.5mm)screwforattachingtheincludedtripodhead. |
|
|
|
# | Component | Description |
|
|
|
13 | Mounting plate | Mount your device to this plate. |
|
|
|
14 | 1/4" screw | Tighten to secure your device to the mounting plate. |
|
|
|
15 | Safety lock pin | Prevents the mounting plate from accidentally |
|
| falling out when the quick release clamp knob |
|
| is released. |
16 | Angle adjustment knob | Controls the tripod head’s vertical angle movement. |
|
|
|
17 | Leveling bubble | Lets you level the tripod head. The tripod head |
|
| is level when the bubble is within the circle. |
|
|
|
18 | Press down to unlock the mounting plate and | |
| clamp knob | up to lock the mounting plate. |
|
|
|
19 | Pan locking knob | Locks the horizontal movement of the head. |
|
|
|
20 | Angle adjustment knob | Controls the tripod head’s horizontal angle movement. |
|
|
|