Rockford Fosgate 45.2 manual Features, Specifications, Accessory Pack, ChannelPunch Amplifier

Punch 45.2

2-Channel Punch Amplifier

Specification

Reference

Sheet

FEATURES

TECHNICAL FEATURES

•Trans•ana – Sound quality topology that sends an extended bandwidth accurately to the output stages of the amplifier

•TOPAZ – Eliminates troublesome ground loop noise between the source and amplifier

•NOMAD – Extremely fast protection system that always protects the amplifier and never degrades the sound

•MOSFET Devices – Power supply and output devices that have high thermal stability, fast switching speed, low output impedance, and wide bandwidth linearity

•DSM (Discrete Surface Mount) Technology – Fewer connections, improved reliability, shorter signal paths, superior signal-to- noise ratio and awesome sonic performance

DESIGN FEATURES

•Diecast Heatsink – Dissipates heat generated by the amplifier’s circuitry

•Gold-Plated RCA Input Jacks – Maintains signal quality by resisting corrosion

•Input Sensitivity Control – Level control can be adjusted to match output levels from a variety of source units

•Gold-Plated Power/Speaker Barrier Strip – Screw terminals accept #10 spade lugs or bare wire sized from 10 to 18 AWG

•Crossover Switch – Crossover can be set for low-pass operation or full range

•Bass EQ – The Bass EQ allows a narrow band adjustment of up to +18dB centered at 45Hz. The bass boost can be bypassed by turning the control to its minimum or counterclockwise position

•LED Power Indicator – Visual indicator illuminates when amplifier is turned on

WARRANTY

•3 Years

SPECIFICATIONS

RMS Continuous Power @ 14.4V (Competition Standard)

Stereo into a 4Ω load (20Hz-20kHz, <0.05% THD)		22.5x2
Stereo into a 2Ω load (20Hz-20kHz, <0.10% THD)		45x2
Bridged into a 4Ω load (20Hz-20kHz, <0.10% THD)		90x1
Dynamic Power @ 14.4V (IHF Standard)
Stereo into a 4Ω load (20Hz-20kHz, 1% THD)		50x2
Stereo into a 2Ω load (20Hz-20kHz, 1% THD)		85x2
Bridged into a 4Ω load (20Hz-20kHz, 1% THD)		170x1
Signal-to-Noise Ratio	>100dB (A-weighted)
Frequency Response	20Hz-20kHz ±0.5dB
Bandwidth	10Hz-250kHz ±3.0dB
Damping Factor @ 4Ω	>200 (at output connector)

Slew Rate		30v/μs
IM Distortion (IHF)		<0.05%
Input Impedance		20kΩ
Factory Default Crossover	80Hz low-pass fixed
Crossover Slope	12dB/octave Butterworth
Source Unit Compatibility (+15dB gain overlap)		.......... 20V max.
Input Sensitivity (0dB gain overlap)		200mV to 3.5V
Operating Voltage	+9V to +15.4V DC
External Battery Fuse		20A (ATC)
Standby Current		700mA
Dimensions	25⁄8"H x 95⁄8"W x 109⁄32"L
	(6.6cm x 24.4cm x 26.1cm)
Weight		5.7 lbs. (2.58kg)

ACCESSORY PACK

(1)	Punch Verification Certificate		(4)	9/64” End Cap Mounting Screws
(4)	Amplifier Mounting Screws (#8 x 3/4” Phillips)		(1)	ATC In-line Fuseholder
(1)	9/64” Allen Wrench		(1)	ATC 20 Amp Fuse
®		®	Specifications subject to change without notice

– 2 –