7.Input Sensitivity Controls – The input level controls are preset to match the output of most source units. They can be adjusted to match output levels from a variety of source units.
8.Punch Equalization Controls – The Punch EQ helps correct for acoustical deficiencies in the listening environment. The Bass control allows a narrow band adjustment of up to 18dB centered at 45Hz. The Treble control is a wide band hinged adjustment with a maximum of 12dB at 20kHz. The Punch EQ can be bypassed by turning the controls to their minimum or counterclockwise position.
9.LED Power Indicator – The LED illuminates when the unit is turned on.
10.XCard (Internal Crossover) – This
®
A M P L I F I E R
27.5Watts RMS continuous power per channel into 4 Ohms with less than 0.08% Total Harmonic Distortion from
®
ROCKFORD CORPORATION
MADE IN THE USA
High-Pass
HP
LP
LP
HP
Full Range
FULL
10
+ | – |
| Do Not Chassis |
Ground Any Speaker. | |
L+ | R– |
For Bridged Mono Wiring
Connect 4Ω mono woofer + to L+ of amplifier and mono woofer – to R– of amplifier. Amplifier will operate mono/stereo simultaneously.
– 6 –