S P E C I F I C AT I O N S
PUNCH 100 | PUNCH 150 | PUNCH 250 | PUNCH 360 | PUNCH 500 | PUNCH 800 |
– i –
Dimensions | 2.60" (6.60cm) H | 2.60" (6.60cm) H | 2.60" (6.60cm) H | 2.60" (6.60cm) H | 2.60" (6.60cm) H | 2.60" (6.60cm) H |
| 9.60" (24.38cm) W | 9.60" (24.38cm) W | 9.60" (24.38cm) W | 9.60" (24.38cm) W | 9.60" (24.38cm) W | 9.60" (24.38cm) W |
| 6.70" (17.01cm) L | 6.70" (17.01cm) L | 7.70" (19.55cm) L | 8.70" (22.04cm) L | 9.70" (24.63cm) L | 14.70" (37.33cm) L |
Frequency Response |
|
| 20Hz to 20kHz ±0.5dB |
|
|
|
Bandwidth |
|
| 10Hz to 200kHz ±3dB |
|
|
|
Damping Factor @ 4Ω (at output connector ) |
|
| >200 |
|
|
|
Slew Rate |
|
| 30 Volts μs |
|
|
|
IM Distortion (IHF) |
|
| <0.05% |
|
|
|
Source Unit Compatibility (+15dB gain overlap) |
|
| 17V max. (low level in) |
|
|
|
Input Sensitivity (+0dB gain overlap) |
| Variable from 250mV to 4V (low level in) |
|
| ||
|
| Variable from 650mV to 11V (high level in) |
|
| ||
Protection |
| NOMAD - Internal |
| |||
|
| overload. Thermal switch shuts down the amplifier in case of overheating. |
| |||
Battery Fusing Rating (External to Amplifier) | 15A | 20A | 30A | 40A | 50A | 60A* |
Fuse Type | ATC | ATC | ATC | ATC | AGU | AGU |
Equalization (45Hz Punch Bass) | Adjustable | Variable | Variable | Variable | Variable | Variable |
| (0, +6, +12dB) | (0 to +18dB) | (0 to +18dB) | (0 to +18dB) | (0 to +18dB) | (0 to +18dB) |
Input Impedance |
|
| 20k ohms |
|
|
|
*recommended fuse not supplied | Specifications are subject to change without notice. |
