Rockford Fosgate HPC1205, HPC1369, HPC1204 T R O D U C T I O N, Package Contents, Installation

IN T R O D U C T I O N

This manual contains information on the construction, installation and operation of the Punch High Performance (HPC) Full Range Speakers. We recommend you keep this manual for future reference.

The Punch High Performance Full Range Speakers are a line of coaxial (two-way) and triaxial (three-way) speakers designed to improve the performance of factory installed car stereo systems. Sized to fit most automotive applications, the Punch High Performance Full Range Speak- ers provide the first step to upgrading your factory system.

PACKAGE CONTENTS

1 Pair of Punch High Performance Full Range Speakers

1 Pair Grilles (HPC1204, HPC1205, HPC1206, HPC1369 only) 20' of 18 gauge Speaker Wire

Mounting Hardware

Installation & Operation Manual

INSTALLATION

Since some of these Punch High Performance Full Range Speakers are most often used as direct replacements for stock speakers and are shipped without grilles, some of the following instructions will not apply. For custom installations see your Authorized Rockford Fosgate Dealer.

1.Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire oper- ating range to ensure there is no obstruction.

2.Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.

3.Using the plastic mounting ring as a template, mark the locations for the mounting screws. Drill the holes with a 1/8" bit.

4.Feed the speaker wires through the cutout and the plastic mounting ring (from the flat side) and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker's positive terminal is indicated with a (+) or colored dot.

– 1 –