Installation

Contents

(1) Pair Power Series Full Range Speakers

(1) Pair of grilles/trim rings (T152, T16, T165, T1675, T1692 and T1693 only)

(1) Pair of 5x7 adapter plates (T142, T1462, T1572 only)

(1) Pair of 6x9 adapter plates (T152, T16, T165, T1675 only)

Mounting Hardware

Installation Considerations

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install these speakers.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your speakers in place.

4.Use high quality connectors for a reliable installation and to minimize signal or power loss.

5.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installation in a boat, take care not to cut or drill through the main hull.

6.Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.

7.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially

the firewall.

Mounting

1.Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there is no obstruction.

2.Refer to the specification chart to determine the proper diameter hole to cut for your speaker model. Cutting and mounting templates can be found at www.rockfordfosgate.com.

3.Mark the locations for the mounting screws. Drill the holes with a 1/8” bit.

4.Feed the speaker wires through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires.The speaker’s positive terminal is indicated with a “+”.

5.On models with slotted holes, fit the speaker into the cutout and install the screws in the slots at the top and bottom.This will allow you to rotate the speaker to match the remaining mounting holes. When aligned, tighten the screws.

OR

6.On models with a trim ring, fit the trim ring over the speaker and mount into place using four (4) screws.

7.Tighten the screws until the speaker is snug in place to prevent rattling. Do not over tighten the screws.

NOTE: For T142, T1462, T152, T16, T165 and T1675 only, if needed use the adapter plate provided to mount the speaker. See Adapter Plate Tem- plates.

illus.-2.1

illus.-2.2

illus.-2.3

8

Page 8
Image 8
Rockford Fosgate T1693 manual Contents, Installation Considerations, Mounting

T1693 specifications

Rockford Fosgate, a leader in the audio industry, has made a significant mark with its T1693 6x9-inch 3-way coaxial speakers. Not only do they promise high-quality sound, but they also come packed with a host of features that enhance the audio experience for car enthusiasts and casual listeners alike.

One of the standout characteristics of the T1693 speakers is their impressive power handling capability. With a peak power of 150 watts and an RMS rating of 75 watts, these speakers can produce a sturdy and robust sound output, ensuring that even the most intense tracks come through crystal clear. This power capability allows them to handle a wide variety of musical genres, making them versatile for any listener’s preferences.

The T1693 is designed with advanced materials that elevate their performance. The speakers feature a polypropylene cone, known for its lightweight and durable properties, which contributes to the clarity and response across a wide frequency range. Additionally, the rubber surrounds enhance durability and improve the speaker's ability to handle powerful bass without distorting the sound.

Incorporating a 3-way design, these speakers consist of a woofer, a midrange speaker, and a tweeter. This configuration allows for a fuller sound by providing a richer soundstage and detailed reproduction of higher frequencies. The integrated tweeter ensures that treble notes are reproduced accurately, delivering a balanced overall sound.

The T1693 also comes with the company's proprietary FlexFit basket design, allowing for easier installation in a variety of vehicles. This feature ensures a more secure fit and provides flexibility regarding mounting options, accommodating different vehicle types and sizes.

Another important aspect of the T1693 is its clean aesthetics. The sleek grille design not only adds a stylish touch to your vehicle's interior but also protects the speakers from dust and potential damage.

In summary, Rockford Fosgate’s T1693 3-way coaxial speakers stand out with their robust power handling, advanced materials, and thoughtful design features. Whether you're a dedicated audiophile or just looking for an upgrade to your car's sound system, the T1693 speakers promise to deliver an exceptional audio experience that will enhance any journey. With their combination of performance, design, and technology, these speakers are undeniably a top choice for car audio enthusiasts.