C A U T I O N S

C a s p i a n Mono Power Amplifier

 

 

 

 

 

 

 

AC MAINS SUPPLY

Your Caspian Power Amplifier is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as below:

230V Products

………………………………….Voltage Range: 220V

– 240V

115V Products

………………………………….Voltage Range:

100V

– 120V

100V Products

………………………………….Voltage Range:

90V

– 110V

The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as supplied with your Power Amplifier, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The Power Amplifier mains fuses are located on the rear panel next to the IEC mains connector. These must only be replaced by the fuse type and rating as described on the fuse rating label on the rear panel of the unit.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no guarantee that such interference will not occur in a specific installation. If interference arises (which you can determine by switching the unit off and on) you could try to remedy this problem by the following:

•Re-orient or re-locate the receiving antenna

•Increase the distance between the Power Amplifier and receiver

•Connect the unit to a different mains circuit from that of the receiver

•Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Caspian Power Amplifier should be located in a well ventilated area and kept away from sources of heat, dust, humidity and direct sunlight.

The Power Amplifier may be positioned either as a free standing unit or alongside another audio/video product. Never place the Power Amplifier on carpet or any surface likely to hinder normal ventilation.

Never allow liquids or other objects to fall into the unit.

This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself.

Unauthorised servicing will void the warranty.

Roksan Audio ltd

Caspian Mono Power Amplifier User Manual

CLASSIFICATION: General Use

version 2.05

All specifications are liable to change without notice. E&OE

Page 3

ENGLISH

Page 2 Page 4
Page 3
Image 3
Roksan Audio M series 1 U T I O N S, AC Mains Supply, General Cautions, Please observe correct mains polarity at all times
Page 2 Page 4

M series 1 specifications

Roksan Audio has long been a prominent name in the high-fidelity audio industry, and the M Series 1 exemplifies its commitment to excellent sound performance and cutting-edge technology. The M Series 1 is a powerhouse of audio engineering designed to meet the demands of audiophiles and casual listeners alike, offering an immersive listening experience that is both refined and dynamic.

One of the main features of the M Series 1 is its advanced digital amplifier technology. This innovative approach allows the unit to deliver exceptional power output with minimal distortion, ensuring that every note is reproduced with clarity and precision. The M Series 1 boasts a remarkable frequency response, allowing listeners to experience the full range of sound from deep bass to shimmering highs without compromising on quality.

Another standout characteristic of the M Series 1 is its connectivity options. It includes a wide array of inputs, making it compatible with various devices such as CD players, vinyl turntables, and streaming services. This versatility means that users can easily integrate the M Series 1 into their existing audio systems, enhancing their overall listening experience.

Roksan has also incorporated state-of-the-art digital signal processing (DSP) within the M Series 1, enabling features like room correction and tonal adjustments. This technology allows the system to adapt to the unique acoustics of any room, optimizing audio performance and ensuring that music sounds great no matter where listeners are seated.

The design of the M Series 1 is equally impressive, featuring a sleek and modern aesthetic that blends seamlessly into any environment. Constructed with high-quality materials, the unit is not only visually appealing but also built to last, ensuring longevity and durability for years to come.

The M Series 1 is equipped with a user-friendly interface, allowing for easy navigation through settings and selections. Whether adjusting the volume, selecting inputs, or accessing DSP features, consumers will appreciate the intuitive design that enhances usability.

In summary, the Roksan Audio M Series 1 is a top-tier audio solution that showcases the brand’s dedication to exceptional sound quality, innovative technology, and user-friendly design. With its robust performance, versatile connectivity, advanced DSP capabilities, and stylish aesthetics, the M Series 1 is poised to satisfy the needs of discerning music lovers looking for a comprehensive audio experience.
Top Page Image Contents