13
Panel Descriptions
fig.2-03e
9. STOP Button
• Pressing the STOP button stops phrase playback or
recording, extinguishing the PLAY indicator.
• Holding down the STOP button and pressing the PLAY
button puts the unit in recording standby.
10. EZ SETUP Button and EZ SETUP Indicator
This activates the EZ Setup feature, which lets you make settings
interactively.
Use this feature if you’re using the AR-3000R for the first time, or
when you need to change the settings in a hurry during play.
The indicator lights up when EZ Setup is active.
→
“Easy Setup and Operation!–EZ Setup” (p. 25)
11. MODE Button and MODE Indicator
For entering the mode for making settings. The indicator lights
up while settings are made.
12. ENTER Button
13. SELECT Dial (Doubles As SELECT Button)
This is used for such operations as selecting phrases and
choosing setting items.
14. OUTPUT VOLUME Knob
This adjusts the volume level of the final output (at the audio
output jacks).
To prevent incorrect operation, you can disable this control
and set the volume at a fixed level.
→
“Keeping the Output Volume Unchanged (Output Volume
Thru)” (p. 127)
15. Headphones Jack
This is for connecting headphones for monitoring recording and
playback.
The headphones volume level is adjusted with the OUTPUT
VOLUME control (the same as for the final volume [the audio
output jacks]).
When you activate the Volume Thru feature, you can use the
OUTPUT VOLUME control to adjust the headphones volume
even when the OUTPUT VOLUME control has been deactivated.
16. POWER Switch
Turn the AR-3000R’s power on and off.
* If you need to turn off the power completely, first turn off the
POWER switch, then unplug the power cord from the power
outlet. Refer to
Power Supply
(p. 5).
17. Card Protector (Included)
This allows you to prevent the card being removed by mistake.
●About When the Indicators Light/Flash
PLAY button
indicator
PAUSE button
indicator
During Playback
During Pause
(Playback)
During Recording
Standby
During Recording
Lights in green
Flashes in green
Flashes in red
Lights in red
Extinguished
Flashes in green
Flashes in red
Extinguished
State
When Playing Back/Recording
When Sync Source is set to MTC
→“Controlling the AR-3000R Using MIDI Signals
(MIDI Control)” (p. 105)
→“Playback Using the Panel on the Unit
(Manual Playback)” (p. 51)
→“Recording Audio” (p. 40)
PLAY button
indicator
PAUSE button
indicator
During Pause
(Playback)
During Recording
Standby
Lights in green
Lights in red
Lights in orange
Lights in orange
State
AR-3000R_e.book 13 ページ ２０１０年３月１８日　木曜日　午後２時６分