Roland ARX-01 Flam/Roll settings (Tone/Flam/Roll screen)

24
Flam/Roll settings
(Tone/Flam/Roll screen)
fig.02-002.eps
Here you can apply a fram or roll effect to each tone.
You can use note velocity to switch the flam or roll effect on/off.
Flam-related parameters
fig.flam.eps
For details on the “note” that can be selected for the Rate
parameter, refer to “About Note” (p. 67)
Parameter Value Description
Flam/Roll Velocity
Threshold 0–127 Boundary between Upper and Lower
Flam/Roll Type
Upper
OFF,
FLAM,
ROLL
Selects the way in which the tone will
sound when the note velocity is above the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.
Flam/Roll Type
Lower
OFF,
FLAM,
ROLL
Selects the way in which the tone will
sound when the note velocity is below the
Velocity Threshold setting. At OFF, the
tone sounds in the normal way.
Parameter Value Description
Rate 1–100,
note Time interval between flam notes
Offset -100–
+100 Difference in strength between note and flam note(s)
Flam Time 1–16 Number of flam notes
Time Ve-
locity Sens -100– +100
Change in the number of flam notes in response to
velocity. With a positive (+) setting, velocity will in-
crease the number of flam notes; with a negative set-
ting (-), velocity will decrease the number of flam
notes.
Feel 0–32 Amount of random change in the strength of flam
notes and their time interval
Time
Velocity
Note On Last Note
(Velocity = Note On)
Rate
Offset
Rate
ARX-01_e.book 24 ページ ２００８年２月１９日 火曜日 午後４時７分