26

Volume change and tone adjustments (Tone/Comp/EQ screen)

fig.02-003.eps

Here you can adjust the compressor and equalizer for each tone.
* The Tone Level in this screen is linked with the Tone Level param-
eter of the Tone/

Output

screen (p. 27).

Compressor

This reduces high levels and boosts low levels, making the overall
volume more consistent.

Compressor-related parameters

EQ-related parameters

Parameter Value Description

Comp Sw

ON/OFF

Compressor on/off
Input Level 0–127 Volume level that is input to the compres-
sor
Attack 0.05–50.0 ms Time from when the input exceeds the
threshold until compression begins
Release 0.05–200 ms Time from when the input falls below the
threshold until compression is turned off
Output Gain 0–+24 dB Level of the output sound
Threshold 0–127 Level above which compression is applied
Ratio 1:1–
:1 Compression ratio

Parameter Value Description

Low Freq 50–400 Hz Frequency of the low range
Low Gain -15–+15 dB Gain of the low frequency range
High Freq 2000–
16000 Hz Frequency of the high range
High Gain -15–+15 dB Gain of the high frequency range
ARX-01_e.book 26 ページ 2008年2月19日 火曜日 午後4時7分