61

41: TRIPLE TAP DELAY

Produces three delay sounds; center, left and right.

fig.MFX41

42: QUADRUPLE TAP DELAY

This effect has four delays.

fig.MFX42a

Stereo location of each delay

fig.MFX42b

Parameter Value Description

Left #1
Center #2
Right #3
0–4000 ms,
note Adjusts the time until the delay sound is
heard.
Feedback #4 -98– +98 % Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-
) settings invert the phase.
HF Damp 200–8000
Hz, BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high frequen-
cies, set this parameter to BYPASS.
Left/Right/

Center
Level

0–127 Volume of each delay
Low Gain -15– +15 dB Gain of the low frequency range
High Gain -15– +15 dB Gain of the high frequency range
Balance D100:0W–
D0:100W Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap

Parameter Value Description

Delay 1–4
#1–#4 0–4000 ms,
note Adjusts the time until the delay sound is
heard.
Level 1–4 0–127 Volume of each delay
Feedback -98– +98 % Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-
) settings invert the phase.
L in
R in
L out
R out

Quadruple Tap Delay

Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback

1

23

4

LR

ARX-01_e.book 61 ページ ２００８年２月１９日　火曜日　午後４時７分