Rhythm Composer (programming your own rhythms)
Backing Keyboard BK-5
r
91

■Copy

This function can be used to copy individual tracks,

Modes and Divisions to replace existing parts while

keeping the remaining parts of the rhythm already in

the RAM memory.

1.
Set “Location” to “Source”.

The following parameters are displayed:

2.
Select a rhythm.

Selecting a factory rhythm: Use the RHYTHM FAM-

ILY buttons and the displayed parameters to select

the desired rhythm. Skip to step (3) below.

Selecting an ‘external’ rhythm: You can also work

with a rhythm on a USB memory:

(a) Press the [USB MEMORY] button to jump to the

“USB Memory” page.

(b) Select the rhythm that contains the track(s) you

want to copy.

NOTE
The “Copy” page now displays a “USB MEMORY” field to
indicate that you can select a rhythm on the connected
USB memory.
3.
Press the [ENTER/SELECT] button.
NOTE
When you import a rhythm, the “Location” parameter is set
to “Destination”. To continue as explained below, you need
to select the “Source” setting.
4.
Rotate the [CURSOR÷VALUE] dial to select the “Track” parameter, then press the [ENTER/SELECT] button.
5.
Rotate the [CURSOR÷VALUE] dial to select the track to be copied.

You can also select “ALL” to copy all tracks of a given

Mode/Division. In that case, “Destination–Track” (see

below) is also set to “ALL”.

6.
Repeat this operation with the “Mode” and “Division” parameters to select the Mode (Major, Minor, 7th, ALL) and Division (Int 1~4, Int ALL, Main 1~4, Main ALL, FDw 1~3, FDw ALL, FUp 1~3, FUp ALL, End 1~4, End ALL).
7.
Press the [KEY] button to listen to the pat-tern you are about to copy.
NOTE
This audition function is not available when you select
“ALL” for the “Mode” or “Division” field.
Parameter Setting Explanation
Location Source, Desti-
nation
Allows you to select
the rhythm whose
tracks you wish to
copy (“Source”) to
another rhythm (“Des-
tination”).
Track ADrums~Acc6,
ALL
Allows you to select
the track you wish to
copy. Select “ALL” to
edit all tracks.
Mode Major, Minor,
7th, ALL
Allows you to select
the Mode to be copied.
Division Intro 1~4,
IntroALL,
Main 1~4,
MainALL,
Fill Dwn 1~3,
Fill DwnALL,
Fill Up 1~3,
Fill UpALL,
End 1~4,
EndALL
Use this parameter to
select the Division you
want to copy.
From Bar~
To CPT
See page 88.
BK-5_US.book Page 91 Monday, November 14, 2011 12:43 PM