186
Adjusting the Display Contrast
Depending on where the BR-900CD is situated, the display
contents may be difficult to read. If this is the case, perform
the procedure given below to adjust the contrast (1 to 21).
fig.00-309
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “SYS,”
and press [ENTER].
fig.00-310d
3. Press CURSOR [ ] [ ] to select “LCD Contrast,” and
adjust the contrast with the TIME/VALUE dial.
fig.00-311d
4. After completing the adjustment, press [UTILITY] (or
press [EXIT] repeatedly) to return to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
If you press and hold [UTILITY] while turning the TIME/
VALUE dial, you will be able to change the contrast in real
time. Choose the method that best suits the BR-900CD’s
setup.
1,4 4
2,3
2
3