12
Using the Tuner Function
CUBE-60XL BASS/CUBE-120XL BASS are equipped with a tuner
function. In addition to manual tuning, you can also use it as a
chromatic tuner.
* Use manual tuning when the strings are substantially out of tune
(such as after changing strings).
* When using the tuner function, no sound is played from the speaker,
the REC OUT/PHONES jack, or the LINE OUT jack.
* The sound input to the AUX IN jack is output.

Manual Tuning

1. Press the [TUNER] switch.

The unit enters the Tuner mode and the [TUNER] switch lights up.

2. Use the Type switch to select the string that you want to

tune.

Knob Position Description
5B Open  fth string of a  ve-string bass with an additional
low string (B)
4E Open fourth string (E)
3A Open third string (A)
2D Open second string (D)
1G Open  rst string (G)
1C Open  rst string of a six-string bass with an additional high
string (C)
AOpen third string (semitone down) (A)
AOpen third string (whole tone down) (G)
* The reference pitch is A=440 Hz. This cannot be changed.

3. Play a single note on the open string that you want to tune.

Tune the string until the green indicator lights.
Flat
Lights red Lights green Lights red
Sharp
Pitch is correct
* The red indicator blinks if the pitch is substantially out of tune.

4. When you have  nished tuning, press the [TUNER] switch

once again.

Chromatic Tuning

If you hold down the [TUNER] switch for one second or longer, the
[TUNER] switch blinks and the unit becomes usable as a“chromatic
tuner,” which automatically determines the name ofthe note closest to
the one played.
As with manual tuning, chromatic tuning allows you to play asingle
note on the string that you want to tune. Tune the string until the
green indicator lights.