24
Getting Started

Basic Operation

NOTE
Once the connections have been completed ( Page
20), turn on power to your various devices in the order
specified. By turning on devices in the wrong order, you
risk causing malfunction and/or damage to speakers
and other devices.
This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required
before the unit will operate normally.
If No Other Equipment is Connected to
the CD-2
1Turn counterclockwise to
“MIN” (minimum).
2On the rear panel, press .
The power turns on. Once the power is on, the screen
lights up.
If Other Equipment is Connected to the
CD-2
1Minimize the volume of all connected
devices.
2Turn counterclockwise to
“MIN” (minimum).
3On the rear panel, press .
The power turns on. Once the power is on, the screen
lights up.
4Power up the device connected to the
AUX OUT jack.
If No Other Equipment is Connected to
the CD-2
1Turn counterclockwise to
“MIN” (minimum).
2On the rear panel, press .
The power turns off.
If Other Equipment is Connected to the
CD-2
1Switch off the power on all connected
equipment.
2Turn counterclockwise to
“MIN” (minimum).
3On the rear panel, press .
The power turns off.

Turning the Power On/Off

Turning the Power On
CHECK Make sure that the device connected to the
AUX OUT jack is powered off.
Turning the Power Off