Main Specifications
Rated Power Output
30 W
Nominal Input Level (1kHz)
INPUT:
AUX IN:
Connectors
INPUT Jack (1/4 inch phone type)
AUX IN Jack (1/4 inch TRS phone type)
RECORDING OUT/PHONES Jack (STEREO 1/4 inch phone type) FOOT Switch Jack (EFX, DELAY/REVERB) (1/4 inch TRS phone type)
Speaker | Power Supply |
AC 117 V, 230 V or 240 V | |
25 cm (10 inches) + Tweeter (Coaxial, |
|
Controls
POWER Switch
<COMPRESSION>
COMPRESSION Knob
<COSM AMPLIFIER>
SHAPE Switch
TYPE Knob (OCTAVE BASS, FLIP TOP, B MAN, T.E, BASS 360, SESSION, CONCERT 810)
GAIN Knob
VOLUME Knob
<EQUALIZER>
BASS Knob
MIDDLE Knob
TREBLE Knob
<EFX>
EFX Knob (CHORUS, FLANGER,
<DELAY/REVERB>
DELAY/REVERB Knob
Indicators
Power
COMPRESSION
EFX
Power Consumption
34 W
Dimension
380 (W) x 300 (D) x 385 (H) mm
Weights
12 kg / 20 lbs 5 oz
Accessories
Owner’s Manual
Options
Foot switch
Connection cable
*0 dBu = 0.775 Vrms
*In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
For EU Countries
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment. This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian
AVIS
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
7
