Roland CUBE 20XL Sample Settings

This is an extreme sound with intense distortion.

This is a high-gain sound that packs a lot of punch in the low end,

while delivering a great deal of edge in the upper range.

You can obtain variations in the sound by moving the [MIDDLE] knob.

If you turn on HEAVY OCTAVE, you can achieve an even greater sense

of distortion in the low end.

This is a transparent sound using spacial eects.

Select the JC CLEAN amp, modeled on the Roland JC-120, then add

chorus and long delay.

Using this setting with a guitar equipped with single coil pickups

makes great sounding arpeggios and chord strumming.

Depending on the phrase being played, it can be eective to set the

delay sound’s delay time slightly slower than the phrase’s tempo.

This produces a raging distortion sound that is very trebly and roughly

textured.

Setting the [GAIN] knob to prevent excessive distortion of the guitar

sound results in a straight guitar sound with brilliant harmonics and

powerful chord sounds.

You can also add the FLANGER to produce a sound with a powerful

swirling eect, much like the sound from a jet.

Additionally, using the guitar’s front pickup and raising the [GAIN] and

[MIDDLE] knobs results in a fat lead sound with long sustain.

The perfect sound for heavy, sharp ris.

Select the high-gain METAL STACK, then use the equalizer to boost the

low end even more.

Used with a humbucking pickup in the rear position, it results in an

extreme distortion eect.

Plus, you can add a long delay to use this as a lead sound with great

sustain.

Adding a short delay produces a doubling sound like that from two

performers playing the same phrases simultaneously.

[SELECT] switch : LEAD

[SELECT] switch : JC CLEAN

[SELECT] switch : LEAD

Sample Settings