Roland DC-13 Synth Selection with the Both Pedal Switch, Specifications, Weight 1 lbs 4 oz

Ibanez X-ING IMG2010 GK-1

_______________________________________

SYNTH SELECTION

Depress the [A/B] pedal, and the unit to be played	Green: The synth connected to Synth B is
will change. You can tell whether Synth A or B is	selected.
currently selected by viewing the LED.

Red: The synth connected to Synth A is selected.

_______________________________________

SYNTH SELECTION WITH THE [BOTH] PEDAL SWITCH

Depress the [Both] pedal, and the LED will light in yellow and both synths will be heard. However, information about SW1 and SW2 (Mode Switch) will be sent only to the device selected with the [A/B] pedal switch.

Depress the pedal again, and the LED will go out and only the device selected with the [A/B] pedal switch will be heard.

_______________________________________

SPECIFICATIONS

DC-13 Dual Bus Converter:	• Dimensions: 6(W) x 8(D) x 2 3/4(H)
• Connectors: One 24-pin input	inches
	• Weight: 1 lbs 4 oz
connector, two 13-pin output connectors,
2 1/4” standard phone jacks for line-level
guitar and hex fuzz.	© copyright March 2005
	www.gr300.com