Roland DP-900 Panel Descriptions

9
Panel Descriptions
Front Panel
fig.panel
1 [Power] switch
Turns the power on/off (p. 14).
2 [Volume] knob
Adjusts the volume level (p. 14).
3 [Brilliance] button
Adjusts the tone brightness (p. 14).
4 [Transpose] button
Transposes the pitch of the keyboard (p. 22).
5 [Split] button
Divides the keyboard into right-hand and left-hand areas,
allowing you to play a different sound in each area (p.
18).
6 [Reverb] button
Adds reverberation to the sound (p. 21).
7 Tone buttons
They are used to choose the kinds of tones (tone groups)
played by the keyboard (p. 16).
8 Display
Displays information such as the song number, tempo,
beat, and parameter settings values.
9 [+] [-] buttons
Allows you to select the value of various settings. Pressing
both the [+] and [-] buttons simultaneously returns the
setting of a particular item or function to its original value.
10 [Metronome] button
Activates the built-in metronome (p. 19).
By holding down this button and the [Beat] button, and
pressing other specified button, you can make settings for
various functions (p. 31–p. 33, p. 35–p. 36).
11 [Beat] button
Specifies the time signature (beat) (p. 20).
12 [Song/Tempo] Button
Plays back the internal songs (p. 15).
Each time you press this button, the song number and the
tempo will be displayed alternately.
Recorder
13 [Play] button
Starts and stops playback of internal songs and recorded
performances (p. 15, p. 24).
14 [Rec] button
Puts the DP-900 in recording-standby mode (p. 26–p. 30).
15 [1] [2] buttons
Plays back or records a performance separately for each
hand. (p. 25, p. 28–p. 30).
This button and the following [2] button are collectively
referred to as the “track buttons.”
16 [Key Touch] button
Modifies the playing feel of the keyboard (p. 23).
Rear Panel
fig.RearPanel
1 MIDI connectors
Connect to external MIDI devices to exchange
performance data (p. 34).
2 Pedal connectors
Connect the pedal to this connector (p. 8).
3 Input jacks
These jacks can be connected to another sound generating
device or an audio device, so that the sound of that
device will be output from the DP-900’s speakers (p. 34).
4 4 Output jacks
Allows you to output the piano’s sound to sound
reinforcement equipment to obtain a more powerful
sound. These can also be connected to a tape recorder or
other recording device to record a performance (p. 34).
5 5 DC In connector
Connect the supplied AC adaptor to this connector (p. 11).
1011 12 1314 15 16
1
23456 7 8 9
1234 5
DP-900_e.book 9 ページ ２００４年１１月２９日 月曜日 午後１２時５８分