19
Selecting an Audio Track
Press the SONG button if the Song Play screen isn’t already visible.1
Press the 2 6 button to select an audio track—for now, select Song
Track 9, which is also Audio Track 1.
The Recording Process
Press the I1 3 button to return to the start of the song.
Press the REC button to open the Audio R ec Standby window and
2
start the metronome.
Here we’ve selected the Input
Select parameter and set it to
MIC/GUITAR so the Fantom-G
“listens” to that input.
Set the Input Select parameter to MIC/GUITAR, as we did in the 3
screenshot above.
Make sure that Audio Rec Mode is set to SOLO, and set Audio Rec
4
Channel to MONO since we’ll be recording a monaural signal.
Watch your input level in the Audio Rec standby window’s meters as
5
you sing into your mic or play your instrument as loud as you intend
to.
Reach around the back of the Fantom-G and turn the LEVEL knob
6
located just to the right of the MIC/GUITAR jack—as viewed from the
Fantom-G’s playing position—to set your level as loud as possible
without lighting the meters’ CLIP indicator.
CLIP
indicator
To begin recording, press F8 (Start)—the Audio Rec window opens.7
You hear a four- beat count-in before recording actually begins.
Make your recording as you hear the previously-sequenced MIDI 8
track playing.
When you’re done, hit the STOP button to end recording—the
9
Fantom-G asks if you want to assign your newly recorded sample to
the currently selected track, or toss it out and try again.
To keep your recording, press F7 (OK). To delete the sample from the
10
Fantom-G’s memory, press F8 (Cancel). If you keep your recording, it
appears on its audio track in the Song Play screen.