32
This switches the amp of the Electric Piano. By changing the
combination of Electric Piano type and amp type, you can create a
variety of sounds ranging from standard Electric Piano sounds to
new sounds that have not been heard before.
Pre Amp Switch
Pre Amp Types
* For details on the “note” that can be selected for some parameter,
refer to
“About Note”
(p. 36)
THRU
No
pre
amp will be used.
OLD
This combines TINE EP(p. 22), reproducing a typical Electric Piano
sound of the early ‘70s.
Selecting the Type of Pre Amp (Pre Amp Screen)
Parameter Value Description
Pre Amp
Switch OFF, ON Turns Pre Amp on/off
Parameter Value Description
Tremolo Switch OFF, ON Turns tremolo on/off.
Tremolo Sync OFF, ON When this is set to ON, the effect is
synchronized with the tempo
See
“About Note”
(p. 36).
Tremolo Rate 0.05–10.00 Hz,
note Frequency of the tremolo
Tremolo Depth 0–127 Depth of the tremolo
Tremolo Duty -10–+10
Specifies the duty cycle of the LFO
waveform used to apply tremolo.
Increasing this value will increase the
duty cycle of the LFO waveform for
the L-channel; the duty cycle for the R-
channel will decrease.
Bass -50–+50 Amount of boost/cut for the low
frequency range
Treble -50–+50 Amount of boost/cut for the high
frequency range
Level 0–127 Output Level
ARX-02_e.book 32 ページ ２００８年３月７日 金曜日 午後７時２２分