35
In the Speaker screen you can select the type of the speaker.
In the Utility screen you can initialize patches.
This operation lets you return the settings of the current patch to their
default values.
1.
Select the patch that you want to initialize.
2.
In the Utility screen, choose Patch Init.
3.
When the confirmation screen appears, press the [F7
(OK)] button.
If you decide to cancel, press the [F8 (EXIT)] button.
* If you’ve installed the ARX-02 in a Fantom-G6/G7/G8, executing
a Factory Reset for the Fantom-G6/G7/G8 will reset the expan-
sion boards to their factory-set condition.
Selecting the Type of Speaker
(Speaker Screen)
Parameter Value Description
Speaker Switch OFF, ON Turns
s
peaker on/off.
Speaker Type
LINE This is a sound via LINE OUT. No
speaker used.
OLD
Reproducing a typical Electric Piano
sound of the early ‘70s.
NEW Reproducing a typical Electric Piano
sound of the late ‘70s through ‘80s.
WURLY Reproducing a typical Electric Piano
sound of the ‘60s.
TWIN This simulates playing through a
guitar amp.
Initializing a Patch (Utility Screen)
ARX-02_e.book 35 ページ ２００８年３月７日 金曜日 午後７時２２分